Set up Windcave HIT Integrated EFTPOS in Retailer

Integrated EFTPOS - Windcave HIT

Faster, error-free card payments. With Windcave HIT, the sale amount goes straight from Retailer to your Windcave terminal – no keying amounts into the card machine, no mismatched totals. Staff take card payments the same way as any other EFTPOS payment.

Before Getting Started

Get these from Windcave before you start:

  • Your HIT username and HIT key – one pair for your whole business.
  • HIT turned on for your account – ask Windcave to confirm. Payments won't go through until this is done.
  • A Windcave terminal for each register, and each terminal's Station ID (its serial number).
  • A Device ID for each register – a short name agreed with Windcave, for example REG1.

You'll also need:

  • Internet access at each register computer.
  • Retailer version 2611.4 or later
  • Your Retailer level D password.
  • Windows administrator access to the register, if your terminal connects through the PC.

Setup

Connect the terminal first, then enter your Windcave details in Retailer once, then set up each register.

Step 1. Connect your terminal to Windcave

Your terminal needs its own connection to Windcave. Windcave can tell you which option suits your terminal.

Option A: Wi-Fi (simplest)

  • On the terminal, press Function, then go to Settings › Network Setup › WiFi. Use the settings code in Windcave's Quick Start Guide.
  • Turn Wi-Fi on, choose your store's network and enter its password.
  • Ask Windcave to confirm the terminal's POS mode is set for HIT.

Then go to Step 2.

Option B: Through your register PC (USB or Bluetooth adapter)

This needs Windcave's SCR Controller software. If you're not comfortable installing software or editing a settings file, ask your IT person to help.

  1. Plug the terminal, or the Windcave Bluetooth adapter, into the register.
  2. Download SCR Controller + BLEAdapter Installer from windcave.com/support-software. Choose the standard installer, not a Dev one.
  3. Right-click the installer, choose Run as administrator and follow the prompts. If it says No pinpad detected, unplug and re-plug the terminal or adapter and try again.
  4. Bluetooth only: on the terminal, go to Function › Settings › POS Mode › Bluetooth POS › Scan. Choose the adapter by its serial number and wait for the Bluetooth connected icon.
  5. Open Notepad as an administrator, open pxscrcontroller_cfg.txt in the SCR Controller folder, change the settings below and save.
  6. Restart the SCR Controller: press the Windows key, type Services, find Payment Express SCR200 Controller, right-click it and choose Restart.
  7. Stop the register going to sleep: in Control Panel › Power Options › Change plan settings, set Put the computer to sleep to Never. Then in Change advanced power settings, set USB selective suspend setting to Disabled.
Setting Set to Why
EnableHitAutoLogon 1 The terminal logs on to Windcave automatically.
IdleDisconnectTimeout (TCP host interface section) 0 Keeps the terminal connected between sales.
SignatureSupport, EnableOffline, UseScrIdlePromptManagement 0 Stops the terminal asking for features that aren't turned on.

If you ever reinstall the Windcave software, repeat steps 5 and 6 – it puts its own settings back. If your store has a firewall, allow the register to reach scr.windcave.com on TCP port 65 and sec.windcave.com on port 443.

WarningImportant: never press RKI INIT on the terminal in Australia. It re-keys the terminal and can't be undone in store.

Step 2. Enter your Windcave details

You only do this part once – every register uses the same details.

  1. On the Retailer main screen, go to Setup › API Connection.
  2. Click the Windcave tile on the left.
  3. Enter your HIT Username and HIT Key.
  4. Check the Currency: AUD in Australia, NZD in New Zealand.
  5. Click Save, then Close. The dot on the Windcave tile turns green.


Step 3. Set up each register

Do this at each register – the settings are saved to the computer you're using.

  1. Go to Setup › Point Of Sale and enter your setup password.
  2. Click the Terminals tab and check this register is selected (highlighted in yellow).
  3. Click the Third Party Integration tab.
  4. Under EFTPOS Payment Method, tick EFTPOS Machine Attached and choose Windcave HIT from the list.
  5. Click Setup.
  6. Enter the terminal's Station ID (its serial number) and this register's Device ID.
  7. Leave Use Test Server (UAT) unticked – with it ticked, the register can't take real payments.
  8. Click Save. Back in Point Of Sale Setup, click Save, then Close.


Step 4. Test a payment

Run this quick check on each register before you start trading. It charges a real card, so use $1.00 and refund it straight after.

  1. Ring up a $1.00 sale and choose EFTPOS. Present your card. The sale should complete and the receipt print.
  2. Refund the $1.00 back to the card, starting from the original sale.
  3. Start another $1.00 EFTPOS payment and click Cancel in Retailer before presenting a card. The terminal should show TRANSACTION CANCELLED.
  4. Go to Tasks › Daily Tasks › Reprint Last EFTPOS Receipt. A copy should print, marked DUPLICATE RECEIPT.

If all of these work, the register is ready to trade.

Day to day

  • Declined cards – the reason shows on screen and a decline docket prints. The sale stays open for another payment.
  • Cancelling – click Cancel in Retailer, or cancel on the terminal.
  • No card presented – the terminal times out after about 30 seconds. Start the payment again.
  • Refunds – refund from the original sale wherever you can, so Windcave can match it. A refund without the original sale may be refused.
  • Reprinting – Tasks › Daily Tasks › Reprint Last EFTPOS Receipt reprints the most recent payment on that register.
  • Settlement – Retailer doesn't settle Windcave payments at end of shift. Check your settlement and banking times with Windcave.

Quick fixes

You see What to do
Cancelled - confirm against the terminal receipt
or Timed out - confirm against the terminal receipt

Retailer couldn't confirm payment. Check the terminal's screen or receipt before taking the payment again, so the customer isn't charged twice.

If Retailer closes during a payment (for example, a power cut), open it again on the same register. It checks with Windcave and records the sale as paid or not paid.

Could not reach the payment gateway Check the register's internet connection. If you have a firewall, check it allows sec.windcave.com.
A user or authentication error Your HIT username or key is wrong. Re-enter both in Setup › API Connection (Step 2).
Station Name Error or Invalid StationId Re-enter the terminal's serial number as the Station ID (Step 3).
HIT START FAILED or INIT TIMEOUT Windcave can't reach your terminal. Check it's on and connected. If it connects through the PC, check the Step 1 settings and restart the SCR Controller.
Terminal stuck on WAIT FOR INIT Check the Step 1 settings table, then restart the SCR Controller.
Terminal stops working after the PC was asleep Unplug and re-plug the cable or adapter (for Bluetooth, pair again). Turn off sleep (Step 1). Allow up to 5 minutes to reconnect.
DECLINED with the card name but no card number The terminal couldn't read the card. Present it again.
INVALID MESSAGE on a refund Refund from the original sale instead.

Need a hand?

For your Windcave account, terminal or settlement, contact Windcave. For Retailer, contact Tower Support at support@towersystems.com.au.

See also: Supported Retailer EFTPOS Integrations.